e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 238
Separation roller (LCF) 1310-0,1,2,8 1311 <Default values of code 1310
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 160,000/160,000/160,000
Separation roller
(PFP upper drawer)
1312-0,1,2,8 1313 <Default values of code 1312
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Separation roller
(PFP lower drawer)
1314-0,1,2,8 1315 <Default values of code 1314
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Separation roller
(Bypass unit)
1316-0,1,2,8 1317 <Default values of code 1316
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Feed roller
(PFP upper drawer)
1320-0,1,2,8 1321 <Default values of code 1320
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Feed roller
(PFP lower drawer)
1322-0,1,2,8 1323 <Default values of code 1322
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Feed roller
(Bypass unit)
1324-0,1,2,8 1325 <Default values of code 1324
(e-STUDIO202L/232/282>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Pickup roller
(PFP upper drawer)
1328-0,1,2,8 1329 <Default values of code 1328
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Pickup roller
(PFP lower drawer)
1330-0,1,2,8 1331 <Default values of code 1330
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Pickup roller
(Bypass unit)
1332-0,1,2,8 1333 <Default values of code 1332
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1: 80,000/80,000/80,000
Recovery blade 1336-0 to 8 1337 <Default values of code 1336
(e-STUDIO202L/232/282)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0/0
Sub-code 1: 64,000/74,000/90,000
Sub-code 4: 120,000/120,000/120,000
Items
PM management set-
ting <Procedure 4>
*Indicated in 8 digits
Date of previous
replacement
<Procedure 2>
Remarks
05/11
To Next Page
Loading...
