Toshiba e-studio202L - Selecting Finishing Modes; Type of Finishing Mode

101
3
3. Selecting Finishing Modes
Type of finishing mode
The available finishing modes differ depending on the type of finishing device installed (MJ-1025, MJ-
1022, MJ-5004, MJ-5005 or MJ-6005). Check the available finishing modes with the table below.
Yes: Available
No: Not available
MJ-1025: Saddle Stitch Finisher
MJ-1022: Hanging Finisher
MJ-5004: Job Separator
MJ-5005: Offset Tray
MJ-6005: Hole Punch Unit
Finishing device
Type of finishing mode
Sort/
Group
Rotate
sort
Staple
sort
Maga-
zine sort
Maga-
zine sort
& Saddle
stitch
Saddle
stitch
Hole
punch
MJ-1025 + MJ-6005 Yes Yes Yes Yes Yes Yes Yes
MJ-1025 Yes Yes Yes Yes Yes Yes No
MJ-1022 Yes Yes Yes Yes No No No
MJ-5004 Yes Yes No Yes No No No
MJ-5005 Yes Yes No Yes No No No
No finishing device Yes Yes No Yes No No No