106
3.SETTING OF BASIC COPY MODES
3.Selecting Finishing Modes (Cont.)
3
Rotate sort mode
In the rotate sort mode, one set of copies is made to exit on another set of copies, being alternated length-
wise or crosswise.
The available paper sizes for this mode is LT/LT-R. Set the LT/LT-R size paper in the drawers or on the
bypass tray in advance.
• This mode cannot be used with automatic paper selection.
The rotate sort destination is the inner tray.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press the finisher button on the basic menu.
4
Press the [ROTATE SORT] button.
• Set other copy modes as required.
5
Press the [START] button.
To Next Page
Loading...
