Toshiba e-studio202L - E-STUDIO202 L;232;282 Specifications

332
12.SPECIFICATIONS & OPTIONS
12
1. e-STUDIO202L/232/282 Specifications
Model name DP-2050/2340/2840
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fixing method Halogen lamp (2 pieces)
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the reversing automatic document feeder is installed: Fixed
scanning system by feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source Xenon lamp
Resolution Scanning 600 dpi x 600 dpi
Writing 2,400 dpi (equiv) x 600 dpi (Smoothing process)
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. LD
Acceptable copy
paper size
Drawer LD, LG, LT, LT-R, ST-R, COMP, 13” LG, 8.5” SQ, A3, A4, A4-R, A5-
R, B4, B5, B5-R, FOLIO, 8K, 16K, 16K-R
Bypass Paper size within 3.9”-11.7” (Length), 5.8”-17” (Width)
Acceptable copy
paper weight
Drawer 17 - 28 lb. Bond
Bypass 17 lb. Bond-110 lb. Index (for continuous feed)
13 lb. Bond-110 lb. Index (for single feed)
17 lb.-28 lb. Bond (When the automatic duplexer is used.)
Warm-up time Approx. 25 seconds*
First copy time 5.4 seconds or less*
Continuous copy speed See “Continuous Copying Speed”.
Multiple copying Up to 999 copies (digital key entry)
Excluded image
width
Copy Leading edge: 0.12"±0.08", Trailing edge: 0.08"±0.08",
Both edge: 0.08"±0.08"
Printer Leading edge: 0.20"±0.08", Trailing edge: 0.20"±0.08",
Both edge: 0.20"±0.08"
Reproduction ratio Actual size: 100±0.5%
Zoom: 25-400% (in 1% increments)
For the reversing document feeder 25-200% (in 1% increments)
Paper supply Drawer Approx. 550 sheets (20 lb. Bond)
Bypass Approx. 100 sheets (20 lb. Bond)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 11 exposure step
Environment (for normal use) Temperature: 10º - 30 ºC (50 º - 86 ºF), Humidity: 20 - 80% (No
Condensation)
Power requirements AC 115 V±10%, 12 A (50/60 Hz)
Power consumption 1.5 kW or less (including optional equipments)