158
5.USING THE EDITING FUNCTIONS
9.COVER SHEET (Cont.)
5
6
Press the [BASIC] button to enter the basic menu, and then select a
paper source of the same size and direction as the cover sheet.
• Select other copy modes as required.
7
Press the [START] button.
• When the Reversing Automatic Document Feeder (optional) is used, the original is scanned and copying
starts.
• When the original is placed on the original glass, perform steps 8 and 9.
8
Place the next original, and press the [START] button.
• Data scanning of this original starts.
• The next original will also be scanned in the same manner when you press the [YES] button on the touch
panel, and then press the [START] button on the control panel.
• Repeat this step until all the originals have finished being scanned.
9
After all the originals have finished being scanned, press the [FIN-
ISHED] button.
• Copying starts.
To Next Page
Loading...
