174
5.USING THE EDITING FUNCTIONS
16.ADF / SADF (Cont.)
5
4
Place the original(s) on the Reversing Automatic Document Feeder
(optional).
P.62 “Using the Reversing Automatic Document Feeder (optional)”
5
Press the [START] button.
Single feed mode
1
Place paper in the drawer(s).
2
Press the [EDIT] button to enter the edit menu. Then press the [Next]
button to switch the menu, and press the [ADF] button.
• If the [SADF] button is already displayed, the single feed mode is set. In this case, skip to step 4.
3
Press the [SADF] button.
• Select other copy modes as required.
To Next Page
Loading...
