Toshiba e-studio202L - Page 225

223
7
6
Key in the password (5 digits) for the selected template, and then
press the [ENTER] button.
• If no password was set when the template was registered, skip to step 7.
7
Press the [NAME1] button and the [NAME2] button, and then enter the
new name of the template.
• When the [NAME 1] or [NAME 2] button is pressed, the letter entry menu ( P.33) is displayed. Up to 11 char-
acters can be entered.
• The following symbols cannot be used for [NAME 1] and [NAME 2].
["], [=], [|], [*], [<], [>], [?], [+], [[], []], [;], [:], [/], [\], [,], [.]
8
Press the [USER NAME] button, and then enter the new user name of
the template.
• When the [USER NAME] button is pressed, the letter entry menu ( P.33) is displayed. Up to 30 characters
can be entered.