Toshiba e-studio202L - Page 27

25
1
Bluetooth Module (GN-2010)
This module enables the Bluetooth printing.
• Installed inside of the equipment
• The Antenna (GN-3010) is necessary.
Antenna (GN-3010)
This is used when the Wireless LAN module and Bluetooth Module are installed.
e-BRIDGE ID Gate (KP-2004, KP-2005)
Users can login and use the equipment simply by holding their IC card over the e-BRIDGE ID Gate.
• This cannot be installed with the Work Table.
* e-STUDIO232/282
Printer Kit (GM-1070)
This kit enables the printing function.
Printer/Scanner Kit (GM-2070)
This kit enables the printing and scanning functions.
Scanner Kit (GM-4070)
This kit enables the scanning function.
* e-STUDIO202L
Printer Kit (GM-1080U)
This kit enables the printing function.
Printer/Scanner Kit (GM-2080U)
This kit enables the printing and scanning functions.
Scanner Kit (GM-4080U)
This kit enables the scanning function.