296
9.BLINKING GRAPHIC SYMBOLS
4.Jam Symbols (Cont.)
9
Releasing a paper misfeed in the Staple Unit (optional)
3
Remove any misfed paper in the paper exit area.
4
Close the front cover.
Releasing a paper misfeed in the Saddle Stitch Unit (optional)
1
Open the front cover of the finisher.
2
Rotate the green knob in the middle
clockwise.
When the stapler is up, the window in the upper right of the knob
becomes blue.
1
Pressing the release lever of the finisher,
move the finisher carefully away from the
copier.
To Next Page
Loading...
