e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT June 2004 © TOSHIBA TEC
3 - 78
Duplex copying:
(1) Shift the aligning plate with the scale as the guide shown in the figure below to adjust the skew.
Fig.3-99
(2) If the image skew is "C" as shown in the figure below, shift the aligning plate in the direction of "-
", and if "D", shift it to "+".
Fig.3-100 Fig.3-101
Shift the aligning plate in the direction of "-". Shift the aligning plate in the direction of "+".
C
D
05/11
To Next Page
Loading...
