Toshiba e-studio2330c User Manual

Adding Staples
The procedure for adding staples of the Finisher (optional) is as follows.
Chapter 3 REPLACEMENT OF SUPPLIES
48
1
Open the front cover of the Finisher.
2
Take o the staple cartridge.
3
Take the empty staple case out of the staple
cartridge.
4
Install a new staple case into the staple cartridge.
5
Install the staple cartridge.
6
Close the front cover of the Finisher.
Finisher (Optional: MJ-1101)

Toshiba e-studio2330c Specifications

General

Brand	Toshiba
Model	e-studio2330c
Category	All in One Printer
Language	English