Chapter 1 PREPARATIONS
20
Touch panel
When the power is turned ON, the basic menu for the copying function appears on this touch panel. The status of the
equipment is also displayed on the touch panel with messages and illustrations.
The menu shown at the time of turning the power ON can be changed to one for functions other than copying, for
example, Fax function. Contact your service technician for details.
1. Function display
The function in use, such as copying or Fax, is displayed.
2. Message indication area
This shows how you operate this equipment or the
current status of this equipment in message form.
3. Alert message indication area
This shows alert messages such as the replacement timing
of the toner cartridges or the waste toner box.
4. Date and time
5. [JOB STATUS] button
This is for conrming the processing status of copy, fax,
scan or print jobs, and also for viewing their performing
history.
6. [Help] button
This is for viewing the explanation of each function or the
buttons on the touch panel.
Message display
The following information appears in the touch panel:
Equipment status, operational instructions, cautionary messages, reproduction ratios, number of copy sets, paper size of
a selected drawer, amount of paper remaining in a selected drawer and date and time.
Touch-buttons
Press these buttons on the touch panel lightly to set various functions.
To Next Page
Loading...
Need help?
General
