How to Read This Manual
Symbols in this manual
In this manual, some important items are described with the symbols shown below. Be sure to read these items before
using this equipment.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or
serious damage, or re in the equipment or surrounding assets.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury,
partial damage to the equipment or surrounding assets, or loss of data.
Note
Indicates information to which you should pay attention when operating the equipment.
Tip
Describes handy information that is useful to know when operating the equipment.
&
Pages describing items related to what you are currently doing. See these pages as required.
Description of original/paper direction
Paper or originals of A4 or B5 / LT size can be placed either in a portrait direction or in a landscape direction. In this
manual, “-R” is added to this paper size when this size of paper or original is placed in a landscape direction.
e.g.) A4 / LT size original on the original glass
Placed in a portrait direction: A4 / LT
Placed in a landscape direction: A4-R / LT-R
Paper or originals of A3 or A4 / LD or LG size can only be placed in a landscape direction, therefore “-R” is not added to
these sizes.
Screens
Screens in this manual may dier from the actual ones depending on the use-environment of the equipment such as the
installing status of options.
To Next Page
Loading...
Need help?
General
