3.PRINTING FROM MAC OS APPLICATIONS
Setting the Layout and Finishing Options 115
PRINTING FROM MAC OS APPLICATIONS
Stapling
You can staple sets of paper as they are ejected from the equipment.
Staple printing is only available when the Finisher is installed.
1
Select [Print] from the [File] menu of the application.
2
Set the position of the staples in [Stapling] from the [Finishing] menu.
Staple
Off
: Prints without stapling.
Upper Left (Portrait) / Upper Right (Landscape): Staples on the upper left for a portrait document, or on the
upper right for a landscape document.
Middle Left (Portrait) / Middle Top (Landscape): Double-staples on the left for a portrait document, or on the
top for a landscape document.
Lower Left (Portrait) / Upper Left (Landscape): Staples on the lower left for a portrait document, or on the
upper left for a landscape document.
Upper Right (Portrait) / Lower Right (Landscape): Staples on the upper right for a portrait document, or on
the lower right for a landscape document.