2.PRINTING FROM WINDOWS APPLICATIONS
Available Functions when Using Multiple MFPs 69
PRINTING FROM WINDOWS APPLICATIONS
Splitting a print job across two items of equipment (Tandem Printing)
This feature prints by splitting one print job across two items of equipment.
If you have to print a lot of copies for large documents, you can share the job across two items of e-STUDIO Series or
Loops Series equipment on a network simultaneously, to finish the job in a shorter time.
1
Display the [Others] tab menu.
2
Click [Output Devices].
3
Select [Split Job across Selected Devices].
4
Select two items of equipment in [Selected Devices], and then specify the number of copies for
each one.
If you select [Auto], the number of copies in [Total Copies] is automatically allocated to the two items of
equipment.
5
Click [OK] to close the [Output Devices] dialog box.
6
Set other printing functions as needed, and then click [OK].
7
Click [Print] or [OK] to send the job.
To Next Page
Loading...
