Toshiba E-STUDIO2500AC - Setting the Paper and Reproduction Ratio; Selecting a Fixed Paper Type

20 Setting the Paper and Reproduction Ratio
0. Setting the Paper and Reproduction Ratio
 P.20 “Selecting a Fixed Paper Type”
 P.22 “Using various types of paper”
 P.26 “Enlarging and Reducing”
 P.27 “Changing the Print Direction”
 P.28 “Selecting the destination tray”
 Selecting a Fixed Paper Type
You can use the printer driver to set various paper types. This section explains the functions on the [Basic] tab menu.
 P.20 “Setting the Paper Size”
 P.20 “Setting the Paper Source”
 P.21 “Setting the Paper Type”
 Setting the Paper Size
Select the size of the document to be printed.
1
Display the [Basic] tab menu.
2
Select the document size in [Original Paper Size].
3
Select the paper size in [Print Paper Size].
If you do not want to enable enlarged or reduced printing, select [Same as Original Size].
4
Set other printing functions as needed, and then click [OK].
5
Click [Print] or [OK] to send the job.
 Setting the Paper Source
1
Display the [Basic] tab menu.
2
Select the paper source in [Paper Source].
The color of the selected paper source changes in the preview area on the [Basic] tab.
3
Set other printing functions as needed, and then click [OK].
4
Click [Print] or [OK] to send the job.