2.PRINTING FROM WINDOWS APPLICATIONS
Setting the Paper and Reproduction Ratio 25
PRINTING FROM WINDOWS APPLICATIONS
5
Click [OK].
6
Check that the custom paper name is displayed in the paper size list, and then click [OK].
Printing on Custom Size Paper
1
Display the printer driver properties, and then select the custom paper size in [Print Paper Size]
from the [Basic] tab menu.
2
Set other printing functions as needed, and then click [OK].
3
Click [Print] or [OK] to send the job.
4
Load the custom size paper in the bypass tray or the drawer.
When using custom size paper that is longer than the standard paper size, see the following when loading and
ejecting paper. See the Paper Preparation Guide for details.
5
Press [JOB STATUS] on the touch panel.
6
Select the paper type that matches the loaded paper.
7
Press the [START] button on the control panel.
If there is no paper in the bypass tray or the drawer, a message is displayed on the touch panel. The paper size
displayed on the touch panel may differ slightly from the paper size that you registered.
To Next Page
Loading...
