Specications of Equipment
This section describes the types of acceptable paper, sheet capacity of each feeder and the specications of the
equipment.
70
Acceptable paper
Feeder Media type Weight Maximum sheet capacity Paper size
Drawer, Paper Feed
Pedestal, Additional
Drawer Module
*1
PLAIN,
RECYCLED
PAPER
60 - 105 g/m
2
16 - 28 lb.
Bond
600 sheets (64 g/m
2
, 17 lb. Bond)
550 sheets (80 g/m
2
, 20 lb. Bond)
500 sheets (81 - 105 g/m
2
, 24 lb.
Bond, 28 lb. Bond)
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO,
305 mm x 457 mm
*8
,
320 mm x 450 mm
*8, *15
,
320 mm x 460 mm
*8, *15
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG,
8.5"SQ, 12" x 18"
*8
K format:
8K, 16K, 16K-R
THICK1
106 - 163 g/m
2
- 90 lb. Index
300 sheets
THICK2
164 - 209 g/m
2
- 110 lb. Index
250 sheets
THICK3
210 - 256 g/m
2
- 140 lb. Index
200 sheets
Large Capacity
Feeder
PLAIN,
RECYCLED
PAPER
64 - 105 g/m
2
17 - 28 lb.
Bond
2360 sheets (64 g/m
2
, 17 lb. Bond)
2000 sheets (80 g/m
2
, 20 lb. Bond)
1660 sheets (81 - 105 g/m
2
, 21 - 28
lb. Bond)
A4, LT
Bypass tray
THIN PAPER
*6, *12
52 - 59 g/m
2
14 - 16 lb.
Bond
1 sheet
A/B format:
A3, A4, A4-R, A5-R, A6-R
*6
, B4, B5, B5-R,
FOLIO, 305 mm x 457 mm
*9, *16
,
320 mm x 450 mm
*10, *11, *15, *17
,
320 mm x 460 mm
*9, *11, *15, *17
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG,
8.5"SQ, 12" x 18"
*9
K format:
8K, 16K, 16K-R
Non-Standard size:
Length: 100 - 297 mm (3.9 - 11.7"),
Width: 148 - 432 mm (5.8 - 17")
PLAIN,
RECYCLED
PAPER
60 - 105 g/m
2
16 - 28 lb.
Bond
100 sheets (64 - 80 g/m
2
, 17 - 20
lb. Bond)
80 sheets (81 - 105 g/m
2
, 21 - 28
lb. Bond)
THICK1
106 - 163 g/m
2
- 90 lb. Index
40 sheets
THICK2
*2
164 - 209 g/m
2
- 110 lb. Index
30 sheets
THICK3
210 - 256 g/m
2
- 140 lb. Index
30 sheets
THICK4
*3, *4
257 - 280 g/m
2
- 150 lb. Index
30 sheets
*6
SPECIAL1,
SPECIAL2
*5
230 g/m
2
30 sheets
*7
SPECIAL3
*14
106 - 163 g/m
2
- 90 lb. Index
40 sheets
TRANSPARENCY
—
30 sheets
*6
A3, A4, LD, LT
ENVELOPE
*6, *13
—
1 sheet
DL (110 mm x 220 mm),
COM10 (4 1/8" x 9 1/2"),
Monarch (3 7/8" x 7 1/2")
CHO-3: 120 mm x 235 mm
(4.72" x 9.25")
YOU-4: 105 mm x 235 mm
(4.13" x 9.25")
TAB PAPER
— —
A4, LT
*1 To print on the back side of THICK1 to 3, use the bypass tray.
*2 For printing the sticker labels, select “THICK2” as the media type.
*3 Only the upper receiving tray of the Finisher, the upper receiving tray of the Saddle Stitch Finisher and the receiving tray of the equipment are
available for paper exiting.
*4 When duplex copying is performed on THICK4, black streaks may appear on the copied image. They are highly visible on an image with high or
uneven density.
*5 SPECIAL1 and SPECIAL2 represent “Waterproof paper”.
*6 Automatic duplex copying is not available.
*7 For duplex copying, use waterproof paper for duplex copying.
*8 Can be placed in the second drawer, Paper Feed Pedestal or the Additional Drawer Module.
*9 When the Finisher is installed, the receiving tray of the equipment is not available for paper exiting. The upper receiving tray of the installed
Finisher or the upper receiving tray of the Saddle Stitch Finisher is available for paper exiting.
*10 If an optional nisher has been installed, the upper receiving tray of the Finisher, upper receiving tray of the Saddle Stitch Finisher and the
receiving tray of the equipment are available for paper exiting.
*11 Note that black streaks may appear on the edge of the printed paper.
*12 When the Finisher or Saddle Stitch Finisher is installed, printed paper exits to the upper exit tray of the Finisher.
*13 When the Finisher or Saddle Stitch Finisher is installed, paper exits to the receiving tray of the equipment. When the Inner Finisher is installed,
paper exits to the receiving tray of the Finisher.
*14 SPECIAL3 refers to “coated paper”. Contact your service technician or representative for details.
*15 When the Inner Finisher is installed, automatic duplex copying is not available.
To Next Page
Loading...
Need help?
General
