Specications of Options
Saddle Stitch Finisher
Model name MJ-1108
Type Floor type (Console type)
Acceptable paper size
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 305 mm x 457 mm, 320 mm x 450 mm, 320 mm x 460 mm, LD,
LG, LT, LT-R, ST-R, COMP, 8.5"SQ, 13"LG, 12" x 18", 13" x 19", 8K, 16K, 16K-R
Acceptable paper
weight
52 - 280 g/m
2
(14 lb. Bond - 150 lb. Index)
Number of sheets
stapled at a time
(including 2 covers (60
- 256 g/m
2
, 16 lb. Bond
to 140 lb. Index)
Paper size
80 g/m
2
20 lb. Bond
90 g/m
2
24 lb. Bond
105 g/m
2
28 lb. Bond
A4, B5, LT, 8.5"SQ, 16K 50 sheets 50 sheets 30 sheets
A3, A4-R, B4, FOLIO, LD, LG, LT-R, COMP, 13"LG, 8K 30 sheets 30 sheets 15 sheets
Stapling position Front, Rear, Double
Number of sheets saddle
stitched at a time
Paper size
80 g/m
2
20 lb. Bond
90 g/m
2
24 lb. Bond
105 g/m
2
28 lb. Bond
A3, B4, A4-R, LD, LG, LT-R, 8K 15 sheets 15 sheets 10 sheets
Number of sheets
center-folded at a time
Paper size
80 g/m
2
20 lb. Bond
90 g/m
2
24 lb. Bond
105 g/m
2
28 lb. Bond
A3, B4, A4-R, LD, LG, LT-R, 8K 5 sheets 5 sheets 5 sheets
Power source Supplied from the equipment
Dimensions 617 mm (24.29") (W) x 603 mm (23.74") (D) x 1085 mm (42.72") (H)
Weight Approx. 70 kg (154.3 lb.)
Power consumption 100 W max.
Tray loading capacity of Saddle Stitch Finisher
Upper Receiving Tray
With mixed paper not loaded
Mode Non-Sort
A4, A5-R, B5, LT, ST-R, 8.5"SQ, 16K
36.75 mm
(250)
A3, A4-R, B4, B5-R, FOLIO, 305 mm x 457 mm, 320 mm x 450
mm, 320 mm x 460 mm, LD, LG, LT-R, COMP, 13"LG, 12"x18",
8K, 16K-R
18.4 mm
(125)
Lower Receiving Tray
With mixed paper not loaded
Mode Non-sort Sort/Group Front/Rear Single Position Stapling Two Positions Stapling
A4, B5, LT, 8.5"SQ, 16K
350 mm
(3000)
350 mm
(3000)
Whichever of 100 sets or 2000
sheets is reached rst
Whichever of 150 sets or 2000
sheets is reached rst
A3, A4-R, B4, FOLIO, 305
mm x 457 mm, LD, LG,
LT-R, COMP, 13"LG, 12" x 18",
8K
175 mm
(1500)
175 mm
(1500)
Whichever of 50 sets or 1000 sheets
is reached rst
Whichever of 75 sets or 1000 sheets
is reached rst
• When mixed-size paper is loaded, the tray loading capacity should follow the specications for larger paper sizes in the above tables.
• For the loading capacity of the saddle stitch tray, refer to the following guide:
& Copying Guide (PDF): “Chapter 3: BASIC COPY MODES” - “Selecting Finishing Mode”
Unit: mm (with allowable error of ±7 mm or 0.28")
Values in parentheses: Number of sheets (80 g/m
2
or 20 lb. Bond)
75