Before Installing the Software in macOS 11
BEFORE INSTALLATION
0.Before Installing the Software in macOS
Refer to following pages to install the software and configure the printer in macOS:
P.11 “About the PPD file”
P.11 “System requirements”
P.13 “Connection Environment”
P.30 “Configuring the Printer Using CUPS”
About the PPD file
You need to install an exclusive PPD file (PostScript Printer Description file) in macOS to print with the equipment.
This file contains information about controller-specific features of the equipment.
System requirements
To install the PPD file in macOS and print with the equipment, the following environment is required.
CPU
1 GHz minimum (1 GHz or faster recommended)
Memory
32-bit processor
-2 GB
64-bit processor
- 2 GB (4 GB recommended)
Display resolution
1028 x 768 dots or more
OS
macOS 10.12 to macOS 13
Protocol
TCP/IP
To Next Page
Loading...
Need help?
General