Toshiba E-studio3040c - Original Glass; Placing Originals

Chapter 1 PREPARATIONS
18
Placing originals
Original glass
1
Raise the Original Cover (optional) or the
Reversing Automatic Document Feeder (optional).
2
Place the original with its face down on the
original glass and align it against the left rear
corner.
3
Lower the Original Cover (optional) or the
Reversing Automatic Document Feeder (optional)
carefully.
Reversing Automatic Document
Feeder (optional)
1
Place the originals face up on the original feeder
tray.
2
Align the side guides to the original length.
Do not place any heavy objects (4 kg (9 lb.) or over) on
the original glass and do not press on it with force.
Breaking the glass could injure you.
A4-R
(
LT-R
)
B4
(
LD
)
When placing mixed-size originals on the Reversing
Automatic Document Feeder (optional), adjust its side guides
to the widest original, and then align the originals against the
guide on the front side.