Toshiba E-studio3040c - Bypass Copying; Density Adjustment

2
Basic Copying Operation
25
Density adjustment
To lighten the density, press , to darken it, press
.
You can manually adjust the density by
pressing either or .
The automatic density adjustment is set by default.
Press [AUTO] to adjust the density
automatically.
Bypass copying
Place paper face down on the bypass
tray.
1111
Press [PAPER TYPE] if the type of the paper you
placed on the bypass tray is other than plain paper.
1
Press the button corresponding to
the size of paper set on the bypass tray
and then
2
[OK].
22
Press the [START] button. Bypass
copying starts.
33
2
1