Toshiba E-studio3040c User Manual

Chapter 2 BASIC OPERATION
22
Basic Copying Operation
The basic copying procedures, such as enlargement/reduction copying and duplex copying as well as bypass copying, are as
follows.
Place the original(s).
& P.18 “Placing originals” in this manual
22
Making copies
1
Key in the desired number of copies, and then
2
press the [START] button on the
control panel. Copying starts.
44
To stop copying, press the [STOP] button on the control
panel and then [MEMORY CLEAR] on the touch panel.
Printed paper exits to the exit tray of the equipment or the
Finisher (optional). The tray to which the paper exits is
indicated by the arrow on the touch panel.
•
•
Select the copy modes as required.
33
Press the [COPY] button on the control panel.
11
2
1
You can switch the color mode. There are 3 color modes as
shown below.
FULL COLOR: All originals are copied in full color. (Default)
BLACK: All originals are copied in black and white.
AUTO COLOR: The equipment automatically judges the
type of each color on originals. Colored
originals are copied in full color and black-
and-white originals are copied in black and
white.

Toshiba E-studio3040c Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Type	Super G3
Fax Speed	33.6 Kbps
Maximum Paper Capacity	3, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, USB
Copy Speed (Black)	30 ppm
Copy Speed (Color)	30 ppm
Operating System Compatibility	Windows, Mac, Linux
Paper Size	A4, A5
Print Resolution	1200 x 1200 dpi