Toshiba E-STUDIO3505AC - Color Balance

4.OTHER PRINTING METHODS
160 Printing From UNIX/Linux
 Color Balance
The Color Balance can be selected using the following options.
Example: The command to set “1” to the color balance for black toner for the print job is “lp -o CBK=1 <filename>”
This function is enabled only when your equipment is a multifunctional digital color system (color MFP).
 Image Attributes
The Image Attributes can be selected using the following options.
Example: The command to set “1” to the brightness for the print job is “lp -o brightness=1 <filename>”
This function is enabled only when your equipment is a multifunctional digital color system (color MFP).
Option Value Alternate Value Description
CBC=value Specify the color density of cyan toner. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
CBM=value Specify the color density of magenta toner. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
CBY=value Specify the color density of yellow toner. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
CBK=value Specify the color density of black toner. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Option Value Alternate Value Description
brightness=value Specify the brightness. You can specify the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
contrast=value Specify the contrast. You can specify the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
saturation=value Specify the saturation. You can specify the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
sharpness=value Specify the sharpness. You can specify the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
backgroundadjust
ment=value
Specify the background adjustment. You can specify the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4