Toshiba e-STUDIO3515AC - To Adjust the Twin-Color Copy Image Quality

2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-72
2.17 To Adjust the Twin-Color Copy Image Quality
 Explanation
When a twin-color copy is made, red may be blended into the black area or colors other than black on
the twin-color copy may look different from what the user desires. Adjust the tint of the colors, the
reproducibility of black in the Red and black mode, or the boundary between black and colors other than
black, in order to reduce a blend of undesired colors into the black area or adjust the tint of colors other
than black.
 Procedures
The procedure to use varies, depending on whether to adjust the tint of colors other than black, the
reproducibility of black in the Red and black mode, or the boundary between black and colors other than
black. Refer to the procedure corresponding to the user’s particular request.
Before adjustment After adjustment
When a twin-color copy is made in the red
and black mode, red may be blended in a
part of black area.
The blend of undesired colors in the black
area is reduced.