3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-22
3.1.8 Blurred Text in Black Adjustment
You can suppress smudging in black text and black thin lines (such as a barcode) printed in only the K
toner.
Change the setting values in [05 ADJUSTMENT MODE] to adjust blurred black text and black thin lines.
• The setting codes to be changed differ between the adjustment of the image quality in full color or twin
color printing and that for black-and-white printing. Select the adjustment procedure corresponding to
the original type to be printed.
To adjust the image quality in full color or twin color printing
(“Auto”, “Color” or “Twin Color” is selected from among the “Color” options on the PCL or PS or XPS
printer driver. Or “Auto”, “Color” or “Twin Color” is selected from among the “Color Type” options on
Mac.)
• The “Color” options are available in the “Basic” tab on the PCL, PS and XPS printer drivers. The
“Color Type” options are available in the “Color Settings 1” menu in the print dialog box on Mac.
<Notes>
• This adjustment is available only when the resolution is 600 dpi.
Adjust blurred black text and black thin lines.
To adjust the image quality in black-and-white printing
(“Black and White” is selected from among the “Color” options on the PCL or PS or XPS printer
driver. Or "Mono" is selected from among the “Color Type” options on Mac.)
• The “Color” options are available in the “Basic” tab on the PCL, PS and XPS printer drivers. The
“Color Type” options are available in the “Color Settings 1” menu in the print dialog box on Mac.
Resolution Color PDL
[05]
Code
Recommended
value
Acceptable
value
range
Default
e-STUDIO
2010AC/
2510AC
e-STUDIO2515AC/
3015AC/3515AC/
4515AC/5015AC
600 dpi
Color
PS 8121 When a larger
value than the
default one is
set, black text or
black thin lines
are thinly
printed.
0 to 9 2
2
PCL 8122 5
XPS 8123 5
Twin
Color
PS 8124 2
PCL 8125 5
XPS 8126 5
To Next Page
Loading...
