Toshiba e-STUDIO3515AC - To Clearly Print Double Lines and Text

3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-72
3.6.5 To Clearly Print Double Lines and Text
 Explanation
When double lines, which are laid out on thin lines or solid filled area, are printed out, they may be dotted
on the printout. Perform this adjustment in order to print them out clearly.
 Procedures
Perform the steps in the order listed below. However, the service technician needs to judge whether or
not to perform both procedures (1) and (2), while checking the print image.
(1) Perform pulse width adjustment.
By performing this adjustment, the line thickness can be changed. If you want to arrange dark lines,
adjust the code to give priority to high density.
For details of the adjustment procedure, refer to "3.1.12 Pulse Width Adjustment".
(2) Perform potential on printing white text / correction setting adjustment.
Before adjustment After adjustment
Thin lines or double lines are dotted on the
printout.
The thin lines or double lines are clearly
printed out.