3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-75
(1) Open the property page of the printer driver. Click “Setting” in the “Image Quality” tab.
Mark the “Use Black for All Text” checkbox in the “Basic” tab.
• This adjustment will be effective, only if a file created on a general application, such as Microsoft
Office, is printed in PostScript (PS). It may not be effective, if a file created on a graphic
application (e.g. Illustrator) or a DTP application (e.g. QuarkXPress) is printed, or a PDF file
created on these applications is printed.
Caution after the adjustment
Nothing in particular.
Remarks
Not all colored text may be printed in black, depending on the type of text (e.g. text larger than 72 points).
PCL
PS
XPS
To Next Page
Loading...
