3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-77
Procedures
• Perform the adjustment in accordance with the procedures below.
• The item to set varies depending on the type of data to adjust. Select an effective option according to
the data format to adjust, such as a print image (raster data), text (font), and line drawing (graphic
data).
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
(1) Perform background adjustment.
For details of the adjustment procedure, refer to "3.1.3 Background Adjustment".
• This adjustment makes all light colors darker. To adjust a particular light color, perform procedures
(2) to (4).
• To adjust the color image: Go to procedures (2) and (3).
• To adjust the black and white image: Go to procedure (4).
* This adjustment will have an effect only on Auto or Color mode printing.
(2) Perform color balance adjustment.
For details of the adjustment procedure, refer to "3.1.5 Color Balance Adjustment".
* This adjustment will have an effect only on Black and white mode printing.
(3) Perform gamma balance adjustment.
For details of the adjustment procedure, refer to "3.1.1 Gamma Balance Adjustment".
Caution after the adjustment
Nothing in particular.
PCL
PS
XPS
PCL
PS
XPS
PCL
PS
XPS Mac
To Next Page
Loading...
