5.Scanning-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
5-24
To scan greenish yellow clearly
Use steps (a) through (c) to perform the adjustment.
(a) Set R (red) to [+] side in Color Balance.
(b) Set G (green) to [-] side in Color Balance.
(c) Set the color balance with a combination of both (a) and (b).
To scan yellow more vividly
Use steps (a) through (c) to perform the adjustment.
(a) Set B (blue) to [-] side in Color Balance.
(b) Set R (red) and G (green) to [+] side in Color Balance.
(c) Set the color balance with a combination of both (a) and (b).
<Note>
• This adjustment influences not only yellow but also other colors.
After adjusting the color balance, copy and check the copy image quality.
Caution after the adjustment
Nothing in particular.
To Next Page
Loading...
