1.General Adjustments – Copying, Printing and e-Filing (Output from Box)
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
1-26
(4) Select [05 ADJUSTMENT MODE]. Select code [4719], and then press the [START] button.
Registration control will be forcibly performed.
(5) Enter code [104], and then press [TEST PRINT].
Paper is fed from the drawer to print out a test print pattern.
(6) Check the first page of the printed test print pattern to identify a pattern for the out-of-registration
colors.
• There are 2 patterns for the out-of-registration colors. Check which pattern the out-of-registration
colors to adjust on the body are included.
Pattern A for out-of-registration colors
Code Test print pattern Paper size No. of copies
104
Test print pattern for identifying
out-of-registration colors
A3/LD 2
Pa
e 1
Patch eliminated
trailing edge
Paper feeding speed
faster than transfer belt
rotating speed
Black belt at the leading edge in the paper feeding direction
Page number
Paper feeding direction
To Next Page
Loading...
