4.APPENDIX
List Print Format 171
4 APPENDIX
WIRELESS SETTINGS are printed only when the Wireless LAN Module is installed.
NETWORK SETTING - GENERAL PRODUCT - GENERAL
Function Description User
ETHERNET SPEED DUPLEX MODE Shows the Ethernet speed setting. NO
NETWORK SETTING - NETWORK - TCP/IP
Function Description User
ADDRESS MODE Shows the TCP/IP address mode. NO
HOST NAME Shows the TCP/IP address mode. NO
IP ADDRESS Shows the IP address of this equipment. NO
SUBNET MASK Shows the subnet mask of this equipment. NO
DEFAULT GATEWAY Shows the default gateway address of this equipment. NO
NETWORK SETTING - NETWORK - IPv6
Function Description User
ENABLE IPv6 Shows whether the IPv6 protocol is enabled or disabled. NO
LLMNR Shows whether the LLMNR (Linklocal Multi-cast Name
Resolution) is enabled or disabled.
NO
ADDRESS MODE Shows the IPv6 address mode. NO
LINK LOCAL ADDRESS Shows the link local address of this equipment. NO
IP ADDRESS Shows the IPv6 address of this equipment. NO
PREFIX LENGTH Shows the prefix length of the IPv6 address. NO
DEFAULT GATEWAY Shows the default gateway address of this equipment. NO
USE DHCPv6 SERVER FOR OPTIONS Shows whether the optional information is obtained from
the DHCPv6 server.
NO
USE STATELESS FOR IP ADDRESS (M FLAGS) Shows whether the stateless usage (IP address acquisition
M flag) is enabled or disabled.
NO
USE STATELESS FOR OPTIONS (O FLAGS) Shows whether the stateless usage (optional information
acquisition O flag) is enabled or disabled.
NO
To Next Page
Loading...
Need help?
General
