Page 8
Copying From the Bypass Tray (Cont’d.)
3. Select the paper type and size.
y When Copying onto Standard Size Paper:
1. Press the # (enter) key. The “Bypass Tray Paper” screen is displayed.
2. Press Select Size.
3. Select the paper size.
4. Press OK twice.
y When Copying onto Custom Size Paper:
1. Press the # (enter) key.
2. Press Custom Size.
3. Enter the vertical size of the paper using the number keys, and then press
# (enter).
4. Enter the horizontal size of the paper using the number keys, and then press
# (enter).
NOTES:
y If Horiz is not highlighted, press Horiz.
5. Press OK.
To Next Page
Loading...
Need help?
General
