Toshiba e-STUDIO4500c - Placing Originals in the Auto Document Feeder

Page 3
 Placing Originals in the Auto Document Feeder
NOTES:
y Do not stack originals above the limit mark on the side guide of the ADF.
y The last page should be on the bottom.
y When you copy two-sided originals, both front and back sides of each original are
scanned at once.
y Do not place objects on the sensors or cover them with your hands, or the original size
may not be detected properly.
y 1: Sensors
1. Set the document guide to the original size.
2. Place the aligned originals face up into the ADF.
y 1: Limit mark
y 2: Document guide
NOTES:
y Straighten any curls in the originals before placing them in the ADF.
y To prevent multiple sheets from being fed at once, fan the originals before placing
them in the ADF.
y Place the originals squarely.