Page 10
Setting OHP Transparencies
1. Press the User Tools/Counter key on the control panel.
2. Press System Settings.
3. Press the Tray Paper Settings tab.
4. Press Next to scroll through the list.
5. Press Paper Type: Bypass Tray.
6. Select OHP or Translucent.
7. Press OK. The paper type selected is displayed.
8. Press the User Tools/Counter key.
NOTE: The settings made will remain valid until they are reset again. After printing on OHP
transparencies or thick paper, make sure to clear settings for the next user.
To Next Page
Loading...
Need help?
General
