Page 16
Image Repeat
The original image is copied repeatedly.
There are two types of designation methods for Image Repeat.
y Whole Area Repeat — Repeatedly copies the
entire image.
y Specified Area Repeat — Repeatedly copies a
specified portion of the image. Decide the base
point of the area, specify the length and the
width, and then specify the location of the area.
Whole Area Repeat
NOTE: The number of repeated images depends on the original and copy paper sizes, and the
reproduction ratio.
y Original: 8 1/2" x 5 1/2" vertical,
Copy paper: 8 1/2" x 11" vertical, OR
Original: 8 1/2" x 5 1/2" horizontal,
Copy paper: 81/2" x 11" horizontal.
y Original: 8 1/2" x 5 1/2" vertical,
Copy paper: 8 1/2" x 11" horizontal, OR
Original: 8 1/2" x 5 1/2" horizontal,
Copy paper: 81/2" x 11" vertical.
To Next Page
Loading...
