1.RESTRICTIONS
TopAccess ADMIN Mode 25
1 RESTRICTIONS
Setting up User Authentication Setting
The following provided for User Authentication Setting differs depending on the equipment with or without the controller:
y Authentication failed print job/Raw Print Job — The option “Hold” cannot be selected when the controller is connected
to the equipment. You can select either “Print” or “Delete”.
The following provided for User Authentication Setting cannot be used when the controller is connected to the equipment:
y Auto Release on Login
For details on the Authentication menu screen, refer to the TopAccess Guide.
Certificate Management menu
Setting up Device Certificate
The following provided for Device Certificate cannot be used when the controller is connected to the equipment:
y SCEP(Automatic)
For details on the Certificate Management menu screen, refer to the TopAccess Guide.
e-STUDIO4540C Series/e-STUDIO6550C Series
e-STUDIO machine with the controller or
e-STUDIO4540C Pro Series/e-STUDIO6550C Pro Series
e-STUDIO4540C Series/e-STUDIO6550C Series
e-STUDIO machine with the controller or
e-STUDIO4540C Pro Series/e-STUDIO6550C Pro Series
To Next Page
Loading...
Need help?
General
