2 GA-1211-EX/GA-1310-EX SPECIFIC FUNCTIONS
42 Operations From the Control Panel
Setting the LDAP service
This function allows this equipment to access the LDAP directory service. The equipment can search the LDAP server for
contacts to specify recipients for Internet Faxes, fax transmissions, and Scan to E-mail jobs.
If the LDAP network service is enabled, you can register the LDAP directory service, and then this equipment can
search for contacts in the LDAP server. To add the LDAP directory service, you must operate using TopAccess. For
more information about registering the directory service, refer to the TopAccess Guide.
When the LDAP network service is disabled, it is not possible to use the user’s e-mail address as “From Address” from
the LDAP server during the User Authentication for Scan to Email.
1
Press [NETWORK] in the ADMIN menu.
The NETWORK menu is displayed.
To display the ADMIN menu, refer to the MFP Management Guide.
2
Press [OTHER].
The OTHER screen is displayed.
To Next Page
Loading...
Need help?
General
