2 BASIC OPERATION
14 Default Settings
Default Settings
A default refers to a setting selected automatically when you turn on the equipment, when the equipment wakes up from
Sleep Mode, or when the [FUNCTION CLEAR] button is pressed on the control panel. To scan your document, the default
settings can be used as they are whereas pressing [COMMON SETTING] during the scan operation allows you to select
the preferred settings for each scan job.
P.34 “Changing Common Settings”
The available settings in the scan mode and their factory defaults are listed in the table below.
The default settings can be changed using the [USER FUNCTIONS] button on the control panel. For details, refer to
the MFP Management Guide.
Settings
Factory Defaults
e-STUDIO4520C Series/
e-STUDIO6530C Series/
e-STUDIO455 Series
e-STUDIO855 Series
Color Mode BLACK —
Resolution 200 (dpi) 200 (dpi)
Original Mode TEXT TEXT
Single/2-sided Scan SINGLE SINGLE
Original Size AUTO AUTO
Rotation 0 (degrees) 0 (degrees)
Compress MID MID
Omit Blank Page OFF —
Outside Erase OFF —
Range Adjustment ±0 —
Exposure AUTO AUTO
Contrast ±0 —
Background Adjustment ±0 ±0
Sharpness ±0 ±0
Saturation ±0 —
RGB Adjustment
Red (R) ±0 —
Green (G) ±0 —
Blue (B) ±0 —
To Next Page
Loading...
Need help?
General
