2 BASIC OPERATION
30 Using Saved Scan Data
Using scans saved in USB storage device
When you select [USB MEDIA] to save your scans, they are stored in the USB storage device connected to the
equipment.
When you save your scans in the USB storage device, a sub-folder is automatically created. The name of the sub-folder
depends on how you operate the Scan to File or USB function.
y “SCAN”—This sub-folder contains files created by the Scan to File or USB function.
y “000-PUBLIC_TEMPLATE_GROUP-[Template Name]”—This sub-folder contains files created using a scan
template in the Public Template group.
y “[Group No.]-[Group Name]-[Template Name]”—This sub-folder contains files created using a scan template in the
User Template group.
Using scans saved in network folders (REMOTE 1/2)
When you select [REMOTE 1] or [REMOTE 2] to store data, they are stored in the Scan folder automatically created in the
specified network folder. When these data contain a template, they are stored in a folder that has been specified in the
template setting.
To Next Page
Loading...
