Toshiba e-STUDIO455 Series - Page 79

4.USING TEMPLATES
Using Meta Scan Templates 77
4 USING TEMPLATES
4
On the [META SCAN] tab, select the group containing the template that you want to
use.
If the desired template group is not displayed on the screen, use and to switch between pages.
5
Select the template that you want to use.
y If you select a template for which the automatic start function is disabled, the screen for performing meta scan
appears. In this case, proceed to Step 6.
y If you select a template for which the automatic start function is enabled ( is shown on the button), and if the
selected template requires no information to be entered, the equipment automatically starts scanning. In this
case, proceed to Step 7.
6
Enter information in each box as required, and then press [SCAN].
1) Press the button for each item and enter information as required.
2) Finally, press [SCAN].
y Required items are marked with asterisks.
y Pressing each button displays an on-screen keyboard. Enter each item using the keyboard and digital keys,
and then press [OK] to set the entry.