2 BASIC OPERATION
20 Default Settings
Default Settings
A default refers to a setting selected automatically when you turn on the equipment, when the equipment
wakes up from Sleep Mode, or when the [FUNCTION CLEAR] button is pressed on the control panel. To scan
your document, the default settings can be used as they are whereas pressing [SCAN SETTING] during the
scan operation allows you to select the preferred settings for each scan job.
P.50 “Changing Scan Settings”
The available settings in the scan mode and their factory defaults are listed in the table below.
To display a list of the selected options for scan settings, press [SETTINGS].
P.18 “Viewing Touch Panel for Scan Menu”
The default settings can be changed using the [USER FUNCTIONS] button on the control panel. For
details, refer to the MFP Management Guide.
Settings Factory Defaults
Color Mode BLACK
Resolution 200 (dpi)
Original Mode TEXT
Rotation 0 (degrees)
Single/2-sided Scan SINGLE
Original Size AUTO
Compress MID
Omit Blank Page OFF
Outside Erase OFF
Range Adjustment ±0
Exposure AUTO
Contrast ±0
Background Adjustment ±0
Sharpness ±0
Saturation ±0
RGB Adjustment
Red (R) ±0
Green (G) ±0
Blue (B) ±0
ADF Scan Noise Reduction NONE
To Next Page
Loading...
Need help?
General
