2 BASIC OPERATION
48 Viewing the Scan Job Status and Log
Viewing the scan job log
A record of scan jobs can be displayed on the [LOG] tab of the JOB STATUS screen. To display the record on
the touch panel, press [JOB STATUS] > [LOG] > [SCAN].
On the [LOG] tab, you can view each job’s destination/file name, agent (scan function), date and time, number
of pages, and status (job result).
Up to 1000 jobs can be listed. To display the previous or next page, press or . The number of jobs
displayed on a page varies depending on the equipment used.
If you want to register an e-mail address on the list to the address book, press [ENTRY].
P.127 “Saving contact information to the address book”
To exit from the SCAN LOG screen, press [CLOSE].
For details of the job record displayed on the [LOG] tab, refer to the TopAccess Guide.
For details on error codes displayed in the “Status” column, refer to the Troubleshooting Guide.
The scan job log can be exported to a USB storage device. For details, refer to the MFP Management
Guide.
To Next Page
Loading...
Need help?
General
