Toshiba E-studio5540c - Setting the Panel Calibration

2 SETTING ITEMS (ADMIN)
124 Setting General Functions
 Setting the panel calibration
When the buttons on the touch panel are hardly to be pressed, this function allows you to adjust the position of each
button.
1
Press [GENERAL] in the ADMIN menu (1/2).
The GENERAL menu (1/2) is displayed.
To display the ADMIN menu, see the following page:
 P.75 “Entering Admin Menu”
2
Press on the GENERAL menu (1/2) screen.
The GENERAL menu (2/2) is displayed.
3
Press [PANEL CALIBRATION].
The panel calibration operation screen (1) is displayed.