2.SETTING ITEMS (ADMIN)
Setting General Functions 129
2 SETTING ITEMS (ADMIN)
Job skip
This menu allows you to select whether to enable or disable the Job Skip function. When this function is enabled, a job
fails due to lack of paper or such is automatically skipped and the next job is processed.
For instructions on how to resolve the cause of a skipped job, refer to the Copying Guide "Chapter 7: CONFIRMING
JOB STATUS" and Printing Guide "Chapter 5: MANAGING PRINT JOBS FROM THE CONTROL PANEL".
1
Press [GENERAL] in the ADMIN menu (1/2).
The GENERAL menu (1/2) is displayed.
To display the ADMIN menu, see the following page:
P.75 “Entering Admin Menu”
2
Press on the GENERAL menu (1/2) screen.
The GENERAL menu (2/2) is displayed.
3
Press [JOB SKIP].
The JOB SKIP screen is displayed.
To Next Page
Loading...
