2.SETTING ITEMS (ADMIN)
Setting Network Functions 153
2 SETTING ITEMS (ADMIN)
4
Continue to another network setting if required, then press [APPLY NOW].
“NETWORK INITIALIZING” is displayed at the lower left of the screen and this equipment starts initializing the
network interface card to apply the changes. This message disappears after it is finished.
Setting the AppleTalk protocol
The AppleTalk protocol must be enabled and properly configured to enable AppleTalk printing with a Macintosh computer.
1
Press [NETWORK] in the ADMIN menu (1/2).
The NETWORK menu is displayed.
To display the ADMIN menu, see the following page:
P.75 “Entering Admin Menu”
2
Press [APPLETALK].
The APPLETALK screen is displayed.
To Next Page
Loading...
