3 MANAGING COUNTERS (COUNTER MENU)
242 Managing Department Codes
Resetting all department counters
This function clears all department counters to “0”.
This function clears only the department counters. You cannot clear the total counter.
1
In the DEPT. MANAGEMENT menu, press [RESET ALL COUNTERS].
The message “CLEAR OK?” is displayed in the CONFIRMATION screen.
For instructions on how to display the screen above, see the following page:
P.226 “Logging on as administrator”
2
Press [YES].
All department counters are now cleared.
Press [NO] to cancel the clear operation.
To Next Page
Loading...
