2 SETTING ITEMS (ADMIN)
180 Setting Security Functions
6
Enter the password and press [OK].
y The input password appears as asterisks (*). You can also use the digital keys on the control panel to enter
numerals.
y You will be returned to the PASSWORD REQUIRED screen.
7
Press [OK].
Importing the certificate begins.
Do not disconnect the USB storage device until the data transfer is complete. Removing the device while data
are being transferred could destroy them or cause a malfunction of the equipment.
8
When importing the certificate is complete, press [OK].
You will be returned to the SECURITY screen.
9
Disconnect the USB storage device from the USB port on the equipment.
To Next Page
Loading...
