Toshiba e-STUDIO557 - Page 171

8.OTHER INFORMATION
Continuous Copying Speed 169
8 OTHER INFORMATION
e-STUDIO757
e-STUDIO857
*1 Only A4 and LT-sized paper can be set in the tandem large capacity feeder (Tandem LCF).
y “Face up” and “Face down” in the table mean how the paper exits.
y The bypass copying speed when the paper size is specified is as listed above.
y TOSHIBA-recommended paper is used for the values of the specifications above.
y These specifications vary depending on the copying conditions and the environment.
Paper size Feeder
Paper type
PLAIN THICK1 THICK2 THICK3
Face
up
Face
down
Face
up
Face
down
Face
up
Face
down
Face
up
Face
down
A4, A5-R, B5,
LT, ST-R,
8.5"SQ
Drawer 75 75 75 75 75 75 65 65
Tandem
LCF
*1
75 75 75 75 75 75 65 65
Bypass tray 46 46 46 46 46 46 46 46
A4-R, B5-R,
LT-R
Drawer 55 52 55 52 55 52 50 48
Bypass tray 38 38 38 38 38 38 38 38
B4, FOLIO, LG,
COMP, 13"LG
Drawer 47 43 47 43 47 43 43 40
Bypass tray 34 34 34 34 34 34 34 34
A3, LD Drawer 40 35 40 35 40 35 37 34
Bypass tray 30 30 30 30 30 30 30 30
Paper size Feeder
Paper type
PLAIN THICK1 THICK2 THICK3
Face
up
Face
down
Face
up
Face
down
Face
up
Face
down
Face
up
Face
down
A4, A5-R, B5,
LT, ST-R,
8.5"SQ
Drawer 85 85 85 85 85 85 72 72
Tandem
LCF
*1
85 85 85 85 85 85 72 72
Bypass tray 50 50 50 50 50 50 46 46
A4-R, B5-R,
LT-R
Drawer 61 56 61 56 61 56 52 50
Bypass tray 42 42 42 42 42 42 38 38
B4, FOLIO, LG,
COMP, 13"LG
Drawer 52 45 52 45 52 45 44 41
Bypass tray 38 38 38 38 38 38 34 34
A3, LD Drawer 43 37 43 37 43 37 37 34
Bypass tray 34 34 34 34 34 34 30 30