2 HOW TO MAKE COPIES
26 Placing Originals
Book-type originals
You can place book-type originals on the original glass.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
Breaking the glass could injure you.
1
Raise the RADF.
3
Lower the RADF carefully.
y Do not lower the RADF forcibly when the original is very thick. There will be no problem in
copying even if it is not fully lowered.
y Do not look directly at the original glass because intensive light may escape during copying.
y If the original size is not detected correctly, press [ZOOM] and select the desired original size.
P.58 “Specifying both the original size and the copy paper size separately”
When it is being closed, the scanner lamp flashes to detect the original size.
2
Open the desired page of the original and place it with
its face down. Align it with the left rear corner of the
original glass.
When you make 2-sided copies from book-type originals in
modes such as book-type original to 2-sided copying or dual
page copying, align the center of the original on the yellow
indicator line of the original glass.
P.77 “Making a 2-sided copy from a book-type original”
P.92 “Dual Page”
To Next Page
Loading...
